And before we begin... excuse the mess on my desk. I'm a messy worker! (I like to think my creativity explodes everywhere...)
To make a plush airplane of your own, you'll need the following:
Fleece (for the body & windows of the plane)
Felt (for the wings and tail of the plane)
Stiff felt (propeller)
Needle & Thread
1 24mm Safety Eye
Sewing machine - optional. You could completely do this all by hand if you wanted.
You'll also see in the picture below my pair of hemostats. These are simply giant tweezers that make flipping pattern pieces inside out a DREAM. I highly recommend getting some if you sew a lot. It's like finger extensions. I bought mine online for three or four dollars.
Download and print the pattern HERE!
I would say this project is an intermediate project. You should know the basics of sewing and have a project or two under your belt before doing this.
I used scrap fleece i had lying around, it was less definitely less than a half yard. Same goes for the felt, less than a half yard, more along the lines of two to three "sheets" if you are buying the paper sized felt.
Stiff felt is found at your local hobby store. The only difference between regular felt and stiff felt is the "stiff" part. It stands on it's own accord and doesn't bend easily.
I always start by cutting out all my pattern pieces. Follow the instructions on the pattern pieces as to how many pieces of each you will need. For the wings and tail pieces, I cut what I like to call "guide" pieces. The wings, I will cut two along the pattern (even though you need four!) and the tail I will cut three along the pattern (even though you need 6!). Then I cut rectangles that are a bit bigger than my pattern pieces for the batting and the other pattern pieces I need to cut, like the photo below.
|Pattern piece cut for the wing, with rectangles of batting and felt.|
The pattern includes a 1/4" seam allowance. Sew your fabric sandwiches together! If you use the rectangle method, like I do (because I'm lazy and it's a wee bit easier in my opinion), you will need to trim down the excess fabric around your seams. Do that now!
|Trimming the seams|
You'll be left with a lovely bunch of wings and tail pieces that should look like the above picture. Flip all your pieces inside out. You want to go in between the felt layers to do the flipping, and you will have...
Wings and tail pieces! Just push on them a bit to flatten them out if they decided to poof a bit on you.
Next you'll be moving on to the body. I cut all the body pieces on the pattern lines (no rectangle shortcuts this time!) out of fleece. You'll want to start by attaching the wings and the tail pieces. I begin at the tail of the plane, taking two body pieces and sandwiching a tail fin between them where the pattern instructs, and repeating with a wing. Repeat on the other side with the third body piece, and second wing and tail piece. You'll be left with something that looks like this:
At this point it's time to flip your plane inside out and add the windows. I hand sew these, because I like the look, but you could machine sew them on if you really want to.
|Check for placement|
|and sew them on!|
Once your windows are sewn on, all six of them, flip your plane back inside out. I hold the wings together through the open seam, and sew from the nose of the plane to where the wings are sticking out. Then I turn the plane around so I start the the tail of the plane, and don't forget to sandwich that last tail piece in there! Sew from the tail to the wings sticking out of the seam. Then it's as easy as pulling the wings through and the body of the plane will follow as you flip him inside out!
|Notice the hole placement on the top of the plane, where the wings were protruding as it was inside out. Also notice the last tail piece has been sewn in!|
Time to add the propeller! I use a 24mm safety eye! If you don't know what that is, they are available in different sizes at hobby stores in doll and bear making sections, and also numerous places online. The propeller itself is made from stiff felt, which we went over before.
Gently bend (and do not crease!) your propeller, and cut a small hole in the center so you can mount the propeller onto the safety eye, like so.
Now take your plane, and cut a small SMALL hole slightly off center from the three meeting seams on the nose of the plane. You do NOT want to cut your seams. Remember when you are cutting that fleece loves to stretch! Your hole WILL get bigger if you get scissor-happy. I like to use the right or left top piece, not the belly of the plane for my slit.
|The tiniest slit will work! Notice that it is off center on the nose of the plane!|
Now insert the stem of the safety eye into the hole and use the washer that came with it to secure it inside the plane. Now it's time to stuff! You may have been wondering WHY there was so much wing inside of the plane? That is so you can put stuffing on top of the wing so it will stay straight during play.
I like to stuff my plushes quite full, and this plane will take a good two or three handfuls if you want it stuffed firmly. Now sew him shut!
Congratulations! You have your own plane plush!! I can't wait to give mine to my nephew... and now I'm going to have to make some more for my own kids.